Rent Fluke Networks DSP-FTA430 SM LAN Cable Certifiers

Fluke FTA-430 Fiber Modules, Fluke Networks keeps its eye on the future – so you don’t have to. Powerful, High Definition Diagnostics

Complete solution for testing and certifying high-speed Fiber Networks
Fluke Networks offers the most complete line of Fiber Test Adapters for testing and certifying Single mode, Gigabit and Single-Mode fiber optic cabling systems. These Fiber Test Adapters are high-performance, high-productivity fiber test options for the DSP-4000, DSP-4100 and DSP-4300 Digital Cable Analyzers.

Rent Microtest DSP-FTA430 SM LAN Cable Certifiers

Features:

  • Test two fibers and two wavelengths simultaneously, automatically saving the test results.
  • Perform bi-directional testing on both fibers under test and save results for both in one record.
  • Utilize Fluke Networks’ CableManager Software for comprehensive results management and report generation.
  • Automatically measure length and propagation delay along with loss.
  • Verify optical connectivity and determine which fibers go to which connectors at a patch panel.
  • Communicate with a person on the other end of the fiber.
  • Track the maximum and minimum power throughput of the test.
  • Withstand drops and other mishaps that occur on the job.

DSP-FTA430 Specifications

General Specifications

Power supply: ±6 V supplied by the DSP-4000 test tool.
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60 ºC
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH, non-condensing
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3” x 4.6” x 1.9” (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215 g)

Rent Fluke Networks DSP-FTA430 SM

Optical Transmitter

Connector: SC, multimode
Emitter type:
FTA420 – Multimode LED
FTA430 – Singlemode laser
FTA440 – 850 nm Vertical Cavity Surface Emitting Laser (VCSEL);
1310 nm FP laser
Wavelengths:
FTA420 – 850 nm and 1300 nm
FTA430 – 1310 nm and 1550 nm
FTA 440 – 850nm and 1310 nm
Power output:
FTA420 -20 dBm (10 mW), typical (into 62.5/125 mm fiber)
FTA430 and FTA440 -10 dBm
Power output stability (8 hours): ±0.25 dB at 23 °C

Optical Receiver

Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to 75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 and 1625 nm
Connector: SC, multimode or singlemode
Detector type: InGaAs
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1550 and 1625 nm.
Power measurement range: +3 dBm to -50 dBm
Power measurement linearity: ±0.25 dB at 23 °C
Length Measurement:
Measured in Loopback Mode with included SC/ST patch cables and
one pair of ST/ST adapters.
FTA420 – 5000 meters of 62.5 um multimode cable
FTA430 – 10000 meters of singlemode cable
FTA440 – 5000 meters of 50.0 um multimode cable
Length measurement accuracy: ±1.5 m plus 2 % of length

Lease Fluke Networks DSP-FTA430 SM LAN Cable Certifiers Rental